Skip to content
Services / Water Quality / Reverse Osmosis System Installation | Circle T Plumbing
Water Quality · Reverse Osmosis System Installation | Circle T Plumbing

Reverse Osmosis System Installation | Circle T Plumbing.

Licensed plumber-installed reverse osmosis drinking water systems for Fort Worth-area homes. We test your water first, specify the right system for your local water chemistry, and back every installation with no-surprises pricing.

  • Texas Responsible Master Plumber License #M45785
At a glance
Warranty
2 years parts, 1 year labor
Financing
Available
Signs you need this

How to tell it's time to call.

  • 01

    You don't love the taste of your tap water

    We know the city water is treated. We just don't love the taste.

  • 02

    Hauling bottled water home is getting old

    A continuous expense accompanied by weekly trips to the store, cases stacked in the pantry, and single-use plastic accumulating at the curb.

What we do

What we do, plainly.

Multi-stage reverse osmosis system installed under a sink

Circle T Plumbing installs reverse osmosis drinking water systems for homes across Fort Worth, Cleburne, and surrounding communities in Tarrant, Parker, and Johnson counties. Our Texas Responsible Master Plumber (License #M45785, issued by the Texas State Board of Plumbing Examiners) assesses your water chemistry, specifies a system matched to your local utility’s documented profile, and installs it correctly — connected to your cold water supply, properly draining, with a dedicated faucet — before you approve a single dollar.

Both Fort Worth municipal water (PWS TX2200012) and Cleburne municipal water (PWS TX1260003) use chloramine as their primary disinfection method. That detail matters for RO installation because chloramine requires a specific pre-filter configuration to protect the membrane. The standard carbon block in a generic, off-the-shelf RO unit is often not rated for chloramine reduction — which means the membrane is working against chemistry it was not designed to handle. We account for that before we specify your system.

The Bottled Water Equation — and a Better Option

Americans purchase roughly 47 gallons of bottled water per person per year — a $50.5 billion industry as of 2024 (Beverage Marketing Corp/IBWA). For a family of four, that is a continuous expense accompanied by weekly trips to the store, cases stacked in the pantry, and single-use plastic accumulating at the curb. The recurring cost of bottled water almost always exceeds the ongoing filter-replacement cost of a well-specified residential RO system.

The frustration the Circle T team hears most often from Fort Worth-area homeowners is this: “We know the city water is treated. We just don’t love the taste, and hauling water home is getting old.” That is a completely reasonable position — and it does not require fear about water safety to be worth solving. The goal is confident, great-tasting water at your tap without the weekly grocery run.

A properly installed under-sink RO system gives you filtered drinking water on demand, eliminates bottled water dependence, and produces water that is consistently better for ice, coffee, and cooking. Circle T Plumbing recommends and installs Charger Water Products RO systems sized and configured for the specific water chemistry in your area.

How Reverse Osmosis Works — Plain English

An RO system pushes pressurized water through a semi-permeable membrane. The membrane’s structure allows water molecules to pass through while blocking the dissolved minerals, compounds, and larger particles that affect taste and water quality. The filtered water collects in a storage tank beneath your sink and flows on demand through a dedicated faucet. The concentrated reject stream — carrying what the membrane blocked — drains away.

The typical residential RO system has multiple stages working together:

Pre-filtration stage: A sediment pre-filter removes particulates, followed by a carbon block filter. For Fort Worth-area homes on chloramine-disinfected water, this carbon stage must be a block rated for chloramine reduction — not standard granular activated carbon (GAC). GAC adsorbs free chlorine effectively but does not break the chloramine bond. Using the wrong pre-filter chemistry shortens membrane life and leaves chloramine components in the feed water.

Membrane stage: The RO membrane performs the primary filtration, significantly reducing dissolved solids, many disinfection byproducts, trace metals, and compounds that affect taste. Our claim-safe position: RO significantly reduces dissolved solids and improves drinking water confidence. We do not say “removes all contaminants” — because no single technology achieves that, and we do not make claims we cannot support.

Post-filter stage: A final polishing filter — typically a carbon block — refines taste before water reaches your faucet.

Charger Water Products systems installed by Circle T Plumbing are specified around this multi-stage architecture and sized for residential flow demand in Fort Worth-area homes.

Fort Worth Water Chemistry and RO System Specification

Fort Worth municipal water (PWS TX2200012) has three characteristics that directly affect how an RO system should be configured:

Chloramine disinfection (1.4–4.3 ppm residual): As noted above, the pre-filter must be a carbon block rated for chloramine reduction. Fort Worth’s average chloramine residual of 3.4 ppm means the membrane will encounter this compound on every gallon processed. Correct pre-filter specification is not optional — it is the single most important specification decision for an RO installation in Fort Worth.

Hardness (6–10 gpg): Fort Worth’s mineral content falls in the hard range. High dissolved mineral concentrations accelerate RO membrane scaling and can reduce the membrane’s effective lifespan. For homes at the higher end of this hardness range, pairing an upstream water softener with the RO system extends membrane life and reduces filter maintenance frequency. Circle T will walk you through this trade-off based on your actual hardness test results.

Alkaline pH (8.1–8.5): Fort Worth water’s alkaline tendency is within the EPA secondary standard range and does not pose a health concern. Some RO system configurations include a remineralization post-filter to adjust finished water pH slightly — a matter of taste preference we can discuss during your consultation.

Cleburne Area: Different Chemistry, Same Licensed Standard

Cleburne municipal water (PWS TX1260003) also uses chloramine as its primary disinfection method, with an annual conversion to free chlorine for system flushing — typically in the fall. Cleburne’s disinfection byproduct levels are notably higher than Fort Worth’s, reflecting the character of its source waters: Lake Pat Cleburne and Lake Aquilla are shallower, more biologically active reservoirs than Fort Worth’s seven-reservoir system, producing more dissolved organic carbon that reacts with disinfectants to form byproducts.

For Cleburne homeowners, the rationale for point-of-use RO is elevated compared to Fort Worth: the same chloramine pre-filter specification applies, and the DBP reduction benefit at the drinking water tap is more pronounced given Cleburne’s higher baseline DBP levels. All detections remain below federal Maximum Contaminant Levels — this is not a compliance issue. It is a reason some Cleburne homeowners choose additional point-of-use treatment even on a fully compliant system, and we will explain what those levels mean in plain English during your water assessment.

For homes in rural Johnson County served by Johnson County Special Utility District (JCSUD, PWS TX1260018), reverse osmosis carries the highest priority of the three utilities in our service area. JCSUD water draws from Trinity Aquifer wells, which carry naturally occurring arsenic and radium at levels that remain below federal MCLs but exceed the Environmental Working Group’s voluntary health guidelines. Reverse osmosis is the residential technology most effective at reducing both compounds. Neither a carbon filter nor a water softener addresses arsenic or radium at the drinking water tap. If you are on JCSUD water and interested in drinking water confidence, an on-site water test is where we start.

Why Licensed Plumber Installation Matters for RO

Reverse osmosis installation is a plumbing project. It involves tapping your cold water supply line, connecting a dedicated drain line, and installing a separate faucet through your sink deck or countertop. Done correctly, the system is sealed, properly pressured for the membrane’s flow requirement, and draining to code. Done incorrectly, it can leak inside a cabinet for weeks before discovery.

Circle T Plumbing’s Texas Responsible Master Plumber License #M45785 — the highest license level the State of Texas issues — applies to every RO installation we perform. That means the work is permitted where required, code-compliant, and backed by our Circle T Trust Guarantee.

Additionally, system sizing matters. An RO membrane must be matched to your household’s daily water demand and your incoming water pressure. Undersized systems struggle to keep the storage tank full; oversized units waste water in the rejection ratio. Circle T sizes every system to your household before recommending it. You see the options — including trade-offs between efficiency and filtration level — and you approve the price before installation begins.

RO as a Home Improvement Signal

A professionally installed, properly functioning under-sink RO system is an increasingly expected amenity in the Fort Worth-area residential market. Homebuyers who do their own water quality research — and more of them do now than five years ago — recognize a correctly installed system as evidence of a homeowner who invested in the property thoughtfully. A Circle T installation comes with documentation: the system brand, model, install date, and maintenance schedule are yours to keep.

Why Circle T Plumbing

Patrick McKinnis runs Circle T Plumbing on a straightforward belief: North Texas homeowners deserve honest information about their water and their plumbing, not pressure-based sales pitches. Our 23+ years of combined experience means we have seen what happens when RO systems are specified incorrectly for local water chemistry — and we specify correctly from the start.

We are a licensed plumbing company that also provides water quality services in-house across Fort Worth and the surrounding service area. As an authorized Charger Water Products installer, we apply manufacturer-backed specifications to the documented chemistry of the utilities we serve. Texas Responsible Master Plumber License #M45785. Insured.

Circle T Trust Guarantee — No Surprises Pricing: You approve the price before installation begins. That is not a marketing line. It is how we work on every job.

Learn more about our water filtration options, water softener installation, or read our Fort Worth Water Quality Guide and Cleburne Water Quality Guide for the full chemistry picture behind your utility’s water.

Schedule Your Reverse Osmosis Consultation

Circle T Plumbing will test your water, explain what we find, and show you whether a reverse osmosis system makes sense for your home and your goals. If it does not, we will say that. If it does, you will see the options and approve the price before we touch anything.

Contact us to schedule your assessment. We serve Fort Worth, Cleburne, Burleson, Benbrook, Joshua, and 30-plus communities across Tarrant, Parker, and Johnson counties.

No surprises pricing. License #M45785.

Call (682) 916-7396

We service
  • Charger Water Products
Your options

Know your options before you decide.

  • Under-sink reverse osmosis

    An RO system provides the highest level of drinking water filtration at a single point of use, typically under the kitchen sink.

  • Whole-house filter

    A whole-house filter — particularly a catalytic carbon system — addresses chloramine taste and odor throughout your home.

How it goes

Step by step.

  1. 1

    Test your water

    Our Texas Responsible Master Plumber assesses your water chemistry.

  2. 2

    See the options

    You see the options — including trade-offs between efficiency and filtration level.

  3. 3

    You approve

    You approve before installation begins.

  4. 4

    Licensed installation

    Connected to your cold water supply, properly draining, with a dedicated faucet.

  5. 5

    Maintenance schedule

    Circle T will walk you through a maintenance schedule before we leave.

Proof

What customers say.

  • Great job while keeping our kitchen clean. Clean water and great tasting coffee are important for us.
    Stephen R.
    Cleburne · Reverse Osmosis Installation
Warranty
2 years parts, 1 year labor
Financing
Available
FAQ

Common questions.

Get your quote.

Tell us what's going on and we'll lay out your options plainly. You approve before we start.

Where we serve
Fort Worth

Also Benbrook, Burleson, Crowley, Mansfield, Arlington, and nearby.

Cleburne

Also Joshua, Keene, Alvarado, Godley, Grandview, and nearby.

View all service areas

Related services

Get your free estimate

Tell us what's going on — we'll call you right back.

What do you need?

We'll never share your information.